Metal Intalox Saddle was developed by the United States Norton, between the shape of its saddle-shaped ring and between, and the advantages of both. Intalox metal structure in the saddle-shaped packing ring based on the increase of the annular tendon, to avoid overlap and ensure a certain degree of strength and rigidity out of a number of small claws, an increase of gas-liquid agitation, enhanced mass transfer, thus produce a unique performance.

Metal Intalox Saddle is referred to as domestic-shaped locks Intel fill, enjoy a high international reputation. This new type of efficient packing for the new equipment, packed tower, plate tower height lower than 35%, 30% decrease in diameter, or increase the efficiency of 10-30%, 20-60% reduction in pressure loss. Domestic wet instead of dry distillation distillation pilot study showed that 20 percent can reduce the investment. In short, the use of a new type of ring can be increased Intalox yield or low power costs and improve separation efficiency.

Metal Intalox Saddle can be a variety of materials, such as carbon steel, stainless steel 304, 304L, 410, 316, 316L, etc. to choose from.

Technical Specification of Metal Intalox Saddle IMTP
Size (mm)		Bulk density (304kg/m3)	Number (per m3)	Surface area (m2/m3)	Free volume (%)	Dry packing factor m-1
15mm	16.5*10.6*0.25	223	324110	275	97.2	300.2
15mm	16.5*10.6*0.3	263	324110	275	96.7	304.9
25mm	25.9*12.6*0.25	163	127180	415	4.8	489.2
25mm	25.9*12.6*0.3	192	127180	344	95.5	393.2
25mm	25.9*12.6*0.4	266	127180	199	96.6	221.0
40mm	35.4*18.8*0.25	124	51180	151	98.4	158.3
40mm	35.4*18.8*0.3	146	51180	151	98.1	159.7
40mm	35.4*18.8*0.4	203	51180	151	97.4	163.2
50mm	48.5*28.6*0.3	95	15550	97	98.8	101.0
50mm	48.5*28.6*0.4	132	15550	97	98.3	102.5
50mm	48.5*28.6*0.5	169	15550	97	97.9	103.9
60mm	67*37*0.4	113	9000	84	98.6	87.3
60mm	67*37*0.5	145	9000	84	98.2	88.4
70mm	76.5*42.5*0.4	83	4690	61	99.0	62.9
70mm	76.5*42.5*0.4	106	4690	61	98.7	63.5